Japan Server Error Fix Lab

ホーム / SSL / TLS

TLS CERT_EXPIRED 再起動前の安全確認

TLS で CERT_EXPIRED が発生した時に、再起動前の安全確認 の観点で原因、出力例、分岐対応、避ける操作を整理します。

highCERT_EXPIRED7 分で読む
最初の確認コマンド
grep -R "CERT_EXPIRED" ./logs
最初に見る証拠

CERT_EXPIRED は「再起動前の安全確認」として確認します。最初に見る証拠は whether reload, restart, queue drain, or rollback is safer です。

検索クエリ
TLS CERT_EXPIREDSSL error CERT_EXPIREDTLS CERT_EXPIRED 再起動前の安全確認

この状況で発生します

A restart might fix the symptom but could also interrupt users or jobs. 画面上の文言だけで判断せず、まず whether reload, restart, queue drain, or rollback is safer を確認し、正常出力と失敗出力を比較します。

症状チェック

  • CERT_EXPIRED が TLS の画面またはログで繰り返されます。
  • certificate chain, SNI, expiry, TLS version が正常ケースと失敗ケースで異なります。
  • browser errors from openssl handshake output を分けた時だけ問題が見えます。
  • リリース、権限、設定、データ更新の直後に起きやすいです。

可能性が高い原因

  • TLS or certificate failure caused by hostname mismatch, expired chain, protocol policy, SNI, or mixed content.
  • 再起動前の安全確認 では whether reload, restart, queue drain, or rollback is safer が最初の手掛かりです。
  • 正常ケースと失敗ケースを比較しないと原因候補が広がりすぎます。
  • キャッシュ、権限、ネットワーク、プロキシ状態が一部ユーザーだけ違って見えることがあります。

1分で先に確認

  1. 初回発生時刻、直近変更、影響ユーザー、URL、オブジェクトIDを記録します。
  2. 正常/失敗ケースで certificate chain, SNI, expiry, TLS version を同じ時間帯に比較します。
  3. 仮説を確認します: TLS or certificate failure caused by hostname mismatch, expired chain, protocol policy, SNI, or mixed content.
  4. 再起動前の安全確認 かを判断します: whether reload, restart, queue drain, or rollback is safer.
  5. 設定変更前に現在値を保存します。

最初に見る証拠

CERT_EXPIRED は「再起動前の安全確認」として確認します。最初に見る証拠は whether reload, restart, queue drain, or rollback is safer です。

出力例

正常出力

Config test passes and active requests or jobs can be drained safely.

失敗出力

The service is crash-looping, has invalid config, or still has in-flight critical jobs.

出力別の判断

  • A restart might fix the symptom but could also interrupt users or jobs.
    Run config tests, inspect active jobs, choose reload when possible, and prepare rollback.
  • 正常ケースと失敗ケースの出力が違います。
    差分が出たレイヤーで先に対応します: For CERT_EXPIRED, apply the fix only after reproducing the same condition and saving the before/after evidence for this exact code.
  • コマンドは正常でもユーザー画面だけ失敗します。
    キャッシュ、Cookie、権限、ネットワーク位置を分けて確認します。

避ける操作

  • Do not restart blindly before saving logs and validating configuration.
  • 原因レイヤーを確認する前に複数設定を同時変更しないでください。
  • データ削除、広い権限付与、全面的なセキュリティ無効化を初動対応にしないでください。

検証状態

自動生成ドラフト: コード別の原因、コマンド、出力分岐、避ける操作を含みます。公式ドキュメントと実運用検証は継続して補強します。

先に実行するコマンド

grep -R "CERT_EXPIRED" ./logs
openssl s_client -connect example.com:443 -servername example.com -showcerts
curl -Iv https://example.com
nmap --script ssl-enum-ciphers -p 443 example.com
date -u
openssl s_client -connect example.com:443 -servername example.com -showcerts
curl -Iv https://example.com
nmap --script ssl-enum-ciphers -p 443 example.com
systemctl status SERVICE --no-pager && journalctl -u SERVICE -n 100 --no-pager

解決順序

  1. CERT_EXPIRED の全文、失敗URL、ユーザー、オブジェクトID、直近変更を記録します。
  2. TLS or certificate failure caused by hostname mismatch, expired chain, protocol policy, SNI, or mixed content に合う証拠を先に集めます。
  3. 失敗ケースと正常ケースを同じコマンドで比較します。
  4. 再起動前の安全確認 の分岐なら Run config tests, inspect active jobs, choose reload when possible, and prepare rollback.
  5. 同じURLと同じコマンドで再検証し、正常出力を記録します。

原因別の対応

  • For CERT_EXPIRED, apply the fix only after reproducing the same condition and saving the before/after evidence for this exact code.
  • Inspect the returned certificate with SNI before editing DNS.
  • Install the full chain and reload the web server or load balancer.
  • Align TLS mode, cipher policy, and origin certificate policy.
  • Replace insecure embedded assets when the issue is mixed content.
  • Clear HSTS or browser cache only after confirming the server response is corrected.
  • 再起動前の安全確認 の分岐では Run config tests, inspect active jobs, choose reload when possible, and prepare rollback.

検証メタ

  • operator-draft
  • official-reference-linked
  • 2026-07-23

更新キュー

  • 更新周期
    weekly-source-review
  • 次の補強
    Add one official-source check and one real output example for SSL CERT_EXPIRED.

環境別の確認ポイント

  • 共有ホスティング、プロキシ、VPN、CDN は browser errors from openssl handshake output の結果を変えることがあります。
  • TLS の管理画面だけでなくコマンド出力と比較します。
  • 日本のホスティング管理画面は完了表示でも DNS/SSL 反映が遅れることがあります。
  • 社内ネットワークと外部ネットワークの両方で確認します。

再発させないために

  • certificate chain, SNI, expiry, TLS version の正常出力例を保存します。
  • fullchain install, SNI vhost, and TLS 1.2+ settings をリリースチェックリストに追加します。
  • 繰り返されるエラーは同じ形式の対応ノートに残します。
  • エラー率、遅延、証明書、ディスク、権限変更のアラートを分けます。