Japan Server Error Fix Lab

ホーム / Docker / Docker

Docker exited 137 遅延・負荷・タイムアウト

Docker で exited 137 が発生した時に、遅延・負荷・タイムアウト の観点で原因、出力例、分岐対応、避ける操作を整理します。

lowexited 1377 分で読む
最初の確認コマンド
grep -R "exited 137" ./logs
最初に見る証拠

exited 137 は「遅延・負荷・タイムアウト」として確認します。最初に見る証拠は latency, worker saturation, connection pools, locks, and long-running jobs です。

検索クエリ
Docker exited 137Docker error exited 137Docker exited 137 遅延・負荷・タイムアウト

この状況で発生します

The issue appears during traffic spikes, exports, batch jobs, or slow queries. 画面上の文言だけで判断せず、まず latency, worker saturation, connection pools, locks, and long-running jobs を確認し、正常出力と失敗出力を比較します。

症状チェック

  • exited 137 が Docker の画面またはログで繰り返されます。
  • logs, exit code, volume, network, port bind が正常ケースと失敗ケースで異なります。
  • image issue from runtime environment issue を分けた時だけ問題が見えます。
  • リリース、権限、設定、データ更新の直後に起きやすいです。

可能性が高い原因

  • resource exhaustion caused by memory pressure, disk or inode shortage, descriptor limits, cache growth, volume state, or oversized workload.
  • 遅延・負荷・タイムアウト では latency, worker saturation, connection pools, locks, and long-running jobs が最初の手掛かりです。
  • 正常ケースと失敗ケースを比較しないと原因候補が広がりすぎます。
  • キャッシュ、権限、ネットワーク、プロキシ状態が一部ユーザーだけ違って見えることがあります。

1分で先に確認

  1. 初回発生時刻、直近変更、影響ユーザー、URL、オブジェクトIDを記録します。
  2. 正常/失敗ケースで logs, exit code, volume, network, port bind を同じ時間帯に比較します。
  3. 仮説を確認します: resource exhaustion caused by memory pressure, disk or inode shortage, descriptor limits, cache growth, volume state, or oversized workload.
  4. 遅延・負荷・タイムアウト かを判断します: latency, worker saturation, connection pools, locks, and long-running jobs.
  5. 設定変更前に現在値を保存します。

最初に見る証拠

exited 137 は「遅延・負荷・タイムアウト」として確認します。最初に見る証拠は latency, worker saturation, connection pools, locks, and long-running jobs です。

出力例

正常出力

Connect, first byte, and total time stay within the expected budget.

失敗出力

Connect time, first byte time, or total time spikes before the error.

出力別の判断

  • The issue appears during traffic spikes, exports, batch jobs, or slow queries.
    Find whether the delay is network connection, upstream processing, database lock, or worker exhaustion.
  • 正常ケースと失敗ケースの出力が違います。
    差分が出たレイヤーで先に対応します: For exited 137, apply the fix only after reproducing the same condition and saving the before/after evidence for this exact code.
  • コマンドは正常でもユーザー画面だけ失敗します。
    キャッシュ、Cookie、権限、ネットワーク位置を分けて確認します。

避ける操作

  • Do not only raise timeouts while the synchronous workload remains unchanged.
  • 原因レイヤーを確認する前に複数設定を同時変更しないでください。
  • データ削除、広い権限付与、全面的なセキュリティ無効化を初動対応にしないでください。

検証状態

自動生成ドラフト: コード別の原因、コマンド、出力分岐、避ける操作を含みます。公式ドキュメントと実運用検証は継続して補強します。

先に実行するコマンド

grep -R "exited 137" ./logs
docker ps -a
docker logs CONTAINER --tail 200
docker inspect CONTAINER
docker compose config
df -h && df -i
ulimit -n
ps aux --sort=-%mem | head
du -sh ./* | sort -h | tail
curl -w 'connect=%{time_connect} start=%{time_starttransfer} total=%{time_total}\n' -o /dev/null -s https://example.com

解決順序

  1. exited 137 の全文、失敗URL、ユーザー、オブジェクトID、直近変更を記録します。
  2. resource exhaustion caused by memory pressure, disk or inode shortage, descriptor limits, cache growth, volume state, or oversized workload に合う証拠を先に集めます。
  3. 失敗ケースと正常ケースを同じコマンドで比較します。
  4. 遅延・負荷・タイムアウト の分岐なら Find whether the delay is network connection, upstream processing, database lock, or worker exhaustion.
  5. 同じURLと同じコマンドで再検証し、正常出力を記録します。

原因別の対応

  • For exited 137, apply the fix only after reproducing the same condition and saving the before/after evidence for this exact code.
  • Measure memory, disk, inode, descriptor, and mounted volume state at failure time.
  • Clean generated artifacts and add retention policies.
  • Raise limits only after removing leaks or oversized batches.
  • Chunk large jobs and stream outputs where possible.
  • Add alerts before hard exhaustion.
  • 遅延・負荷・タイムアウト の分岐では Find whether the delay is network connection, upstream processing, database lock, or worker exhaustion.

検証メタ

  • operator-draft
  • official-reference-linked
  • 2026-07-23

更新キュー

  • 更新周期
    weekly-source-review
  • 次の補強
    Add one official-source check and one real output example for Docker exited 137.

環境別の確認ポイント

  • 共有ホスティング、プロキシ、VPN、CDN は image issue from runtime environment issue の結果を変えることがあります。
  • Docker の管理画面だけでなくコマンド出力と比較します。
  • 日本のホスティング管理画面は完了表示でも DNS/SSL 反映が遅れることがあります。
  • 社内ネットワークと外部ネットワークの両方で確認します。

再発させないために

  • logs, exit code, volume, network, port bind の正常出力例を保存します。
  • volume permissions, port conflicts, image tag, healthcheck をリリースチェックリストに追加します。
  • 繰り返されるエラーは同じ形式の対応ノートに残します。
  • エラー率、遅延、証明書、ディスク、権限変更のアラートを分けます。